DVR User Manual

D-160 Owner's Manual (Names and Functions)

At this time if you press the DISP SEL key, the Disk Remain display will appear. (Both

recordable time and hard disk capacity remaining will be converted to mono track and

expressed in time and megabites.)

DISK REMAIN display

If "BAR/BEAT/CLK" is selected for the timebase (explained later), the DISK REMAIN

indication will show a value (in terms of the number of measures) calculated based on the

last beat/tempo data on the tempo map of the recorded song.

When you press the DISP SEL key again, the Setup mode display will appear.

At this time, the D-160 has not entered the Setup mode. To put the D-160 into the Setup

mode, press the EXECUTE/YES key. After pressing the EXECUTE/YES key, if you wish to go

back to the previous status, press the EXIT/NO key.

Setup mode display ("SETUP" indication is flashing)

44.1kHz

SETUP

9 1011121314151687654321

∞

If you press the DISP SEL key again, the screen will return to the "ABS TIME" display.

4. Switching the Time Base display using the EXECUTE/YES key and

DISP SEL key

When the screen is showing the ABS TIME or REMAIN display, if you press the DISP SEL key

repeatedly while holding down the EXECUTE/YES key, the TIME BASE display will change

cyclically. You can select one of the following Time Base displays.

ABS (Absolute Time)

BAR/BEAT/CLK (Bar/Beat/Clock)

MTC (MIDI Timecode)

44.1kHz

REMAIN

9 1011121314151687654321

∞

44.1kHz

ABS

9 1011121314151687654321

∞

44.1kHz

SIGNATURE

9 1011121314151687654321

∞

44.1kHz

MTC

9 1011121314151687654321

∞