8288 441 100 Owner’s Manual Model 20bit Dual Multi Effect Processors
DE-1 Owner’s Manual CAUTION: CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE RISK OF ELECTRIC SHOCK DO NOT OPEN OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE DO NOT REMOVE COVER (OR BACK). ET POUSSER JUSQU' AU FOND. NO USER - SERVICEABLE PARTS INSIDE.
DE-1 Owner’s Manual Precautions (please read before use) Introduction Power supply Thank you very much for having purchased the Fostex DE-1. This unit is a completely independent two channel Multi Effect Processor that employs the A. S. P. (Fostex Advanced Signal Processing Technology), which is newly developed by Fostex. It provides high quality ambient effects almost equivalent to a professional effect processor.
DE-1 Owner’s Manual Digital Effect Functions The DE-1 offers high quality ambient effects by employing the A. S. P. (Fostex Advanced Signal Processing Technology), which is exclusively developed by Fostex. With the A. S. P., you can obtain an incomparably clean and high density Hall Reverb, overwhelmingly clear Room Reverb and wonderfully hi-fidelity Plate Reverb.
DE-1 Owner’s Manual The Details of the Preset Effects The DE-1 has 11 preset Effect Types available on both the Dual Mode and Single Mode. Each Effect Type further offers a maximum of 11 variations. See Operations on page 16 and 17 for how to set up the Preset Effects. In the following list, the numbers attached to the Preset Effects are categorized from (a) ~ (f), (A) ~ (J) and refer to the “Algorithm Reference Numbers”. They tell you how the DE1 operates internally in each Preset Effect.
DE-1 Owner’s Manual ROOM 9 (Small Live House) ROOM 10 (Back-Stage) ROOM 11 (Mid-Freq Small Hall) (a) Room reverb simulating a small club. (a) Room reverb simulating the sound back-stage. (a) Room reverb with unique character in the mid-range.
DE-1 Owner’s Manual DELAY DELAY 1 (Normal Mono Delay) DELAY 2 (Long Feedback Mono Delay) DELAY 3 (Single Mono Delay) DELAY 4 (Normal Panning Delay) (d) (d) (d) (a) DELAY 5 (Long Feedback Panning Delay) (a) DELAY 6 (Single Panning Delay) (a) DELAY 7 (L-R Delay) (a) DELAY 8 (Long Feedback L-R Delay) DELAY 9 (Single L-R Delay 1) DELAY 10 (BBD Delay) DELAY 11 (Single L-R Delay 2) (a) (a) (d) (a) Conventional mono delay with appropriate feedback level and high ratio. Mono delay with long feedback level.
DE-1 Owner’s Manual PITCH PITCH 1—3 (+/- Octave Shift) PITCH 4—6 (0 ~ +2 Octave Shift) PITCH 7—9 (-2 ~ 0 Octave Shift) PITCH 10 (Feedback Pitch Shift 1) PITCH 11 (Feedback Pitch Shift 2) (d) Pitch shift with a variable range of +/-1 octave. (No pitch shift when ADJUST = 0.) Select one of three variations: PITCH 1 is normal, PITCH 2 has faster response, and PITCH 3 is clearest. (d) Pitch shift with a variable range of 0— +2 octaves. (+1 octave when ADJUST = 0.
DE-1 Owner’s Manual S. HALL 2 (Lo-Freq Small Hall) (A) Same as DUAL mode S. HALL 2, but higher density reverberation. (Since special processing of the overtone structure is being performed, it is not possible to adjust PARAM.3 “Character.”) (A) Same as DUAL mode S. HALL 3, but higher density reverberation. (A) Same as DUAL mode S. HALL 4, but higher density reverberation. (A) Same as DUAL mode S. HALL 5, but higher density reverberation. (A) Same as DUAL mode S. HALL 6, but higher density reverberation.
DE-1 Owner’s Manual VOCAL VOCAL 1 (Presence Vocal Booth) VOCAL 2 (Vocal Reverb 1) VOCAL 3 (Natural Vocal Booth) VOCAL 4 (Fat Vocal) VOCAL 5 (Arena Vocal) VOCAL 6 (Vocal Reverb 2) VOCAL 7 (Back Chorus) VOCAL 8 (Ballad Vocal) VOCAL 9 (Solo Vocal) VOCAL 10 (Flange Vocal 1) VOCAL 11 (Flange Vocal 2) (A) (A) (A) (A) (A) (A) (A) (A) (A) (B) (B) Same as DUAL mode VOCAL 1, but higher density reverberation. Same as DUAL mode VOCAL 2, but higher density reverberation.
DE-1 Owner’s Manual MISC (Miscellaneous) MISC 1 (Normal Gate Reverb) MISC 2 (Hi-Freq Mono Snare Gate) MISC 3 (Hi-Freq Stereo Snare Gate) MISC 4 (Lo-Freq Mono Kick Gate) MISC 5 (Spring Reverb 1) MISC 6 (Spring Reverb 2) MISC 7 (Large Hall E/R) MISC 8 (Presence Large Hall E/R) MISC 9 (Small Hall E/R) MISC 10 (Presence Small Hall E/R) MISC 11 (Normal Reverse Reverb) (A) (G) (A) (G) (A) (A) (A) (A) (A) (A) (A) Conventional gate reverb suitable for a wide range of applications.
DE-1 Owner’s Manual FLANGE FLANGE 1 (Stereo Duo Flange) (E) FLANGE 2 (St Hi-Rate Duo Flange 1) (E) FLANGE 3 (St Hi-Rate Duo Flange 2) FLANGE 4 (Stereo Solo Flange 1) (E) (E) FLANGE 5 (Stereo Solo Flange 2) FLANGE 6 (Stereo Duo Flange + Hall) FLANGE 7 (Stereo Duo Flange + Plate) FLANGE 8 (Stereo Duo Flange + Wet Plate) FLANGE 9 (Stereo Solo Flange + Hall) FLANGE 10 (Stereo Solo Flange + Plate) FLANGE 11 (Stereo Solo Flange + Wet Plate) (E) (C) (C) (C) (C) (C) (C) Dual stereo flanger that preserves t
DE-1 Owner’s Manual Single Mode (G) (A) L L IN L EFF 1+2 R EFF 1+2 IN R L R R (B) (H) L IN EFF 1 R L EFF 2 L IN R R EFF 1 L EFF 2 R (I) (C) L EFF 1 IN L L EFF 2 R EFF 1 L EFF 2 R IN R R (D) (J) L EFF 1 IN EFF 1' EFF 1' L EFF 2 R R L EFF 1 L EFF 2 R IN R (E) L EFF 1 L R EFF 2 R EFF 2' IN (F) L EFF 1+2 IN L R R 13
DE-1 Owner’s Manual Functions Here, we will discuss the switches and control knobs on the front panel and Input/Output jack sockets on the rear panel. Note that some functions operate in a different ways depending on either the Dual Mode or Single Mode you set up. Functions of the Dual Mode EFFECT 1 VARIATION SW EFFECT 2 TYPE SW Use this to choose the Variation of the Effect Type for Effect 1. There are 11 variations available on each Effect Type. Use this to choose the Effect Type for Effect 2.
DE-1 Owner’s Manual Functions of the Single Mode TYPE SW Use this to choose the Effect Type on the Single Mode. There are 11 types available. PARAM. 1 knob PARAM. 2 knob This control knob adjusts the Effect Parameter 1. The center position is the default setting. If you turn it to the left, the parameter will decrease. Similarly, if you turn it to the right, the parameter will increase. This control knob adjusts the Effect Parameter 2. The center position is the default setting.
DE-1 Owner’s Manual How to use the Dual Mode Here, we discuss the practical operation of the Dual Mode. The Dual Mode has the features listed below. 1. You can use it as a two channel Effect Processor. 2. It provides one mono Input and stereo Outputs on each channel. 3. It has an independent PARAMETER ADJUST knob on each channel. With these, you can alter the parameter setting in more detail on top of the typical preset designed for each Effect.
DE-1 Owner’s Manual MODE SINGLE DUAL the “DUAL” on the 1 Select MODE SW. 2 3 The PEAK LED indicator on the front panel is designed so that it will illuminate when the Input signal reaches 6dB below the distortion level. First, adjust the Input level using the control knob and watch the LED indicator. The best level setting makes the PEAK LED illuminate occasionally.
DE-1 Owner’s Manual : Adjust the incoming signal level from the musical instruments. See the Caution below for how to adjust the Input Level.
DE-1 Owner’s Manual Block Diagram TYPE VARIATION DRY Dual Mode L (MONO) EFF D/A EFFECT PROCESSOR VARIATION R D/A L (MONO) EFF TYPE D/A DRY ADJUST DRY INPUT MIX OUTPUT 1 EFF A/D INPUT 1 (1&2) EFFECT PROCESSOR ADJUST D/A R D/A L (MONO) DRY INPUT MIX OUTPUT 2 EFF A/D INPUT 2 Single Mode A/D INPUT VARIATION EFF TYPE DRY INPUT L (MONO) ADJUST ADJUST ADJUST PARAM.1 PARAM.2 PARAM.
Declaration of EC Directive This equipment is compatible with the EMC Directive (89/336/EEC) - Directive on approximation of member nation's ordinance concerning the electromagnetic compatibility and with the Low Voltage Directive (73/23/ EEC) - Directive on approximation of member nation's ordinance concerning electric equipment designed to be used within the specified voltage range.
