Owner’s Manual PC100USB Volume Controller
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Table of contents :Turning the volume setting too high is strongly discouraged. Not only is it potentially harmful to your ears, it may blow out the speakers. Safety instructions. . . . . . . . . . . . . . . . . . . E-2 Table of contents. . . . . . . . . . . . . . . . . . . . E-3 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . E-3 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . E-3 Supplied accessories . . . . . . . . . . . . . . . . E-3 About power supply . . .
. Compliance with Part 15 of FCC Rules and Canadian ICES-003. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that many cause undesired operation. However, there is no guarantee that interference will not occur in a particular installation.
Connection example PM0.4n PM0.4n Supplied USB cable Supplied RCA plug cable Supplied RCA plug cable :Before you connect the PC100USB to a computer or audio equipment, turn down the output volume of the audio equipment and the PC100USB. :When the [PHONES] jack is plugged in, no signal is output from the [OUTPUT] (L, R) jacks. Computer requirements You can connect a computer that meets the following requirements. • A USB 2.0 port is provided.
Computer settings Output device setting • Windows Vista/Windows 7 1) Select “Hardware and Sound” from the Control panel. To receive a digital audio signal from your computer via USB, you must make audio output setting of the computer appropriately. The following describes how to select the PC100USB as the sound output device of a computer for each OS. 2) Select “Sound” to open the “Sound” window. 3) Select “Playback” tab.
Computer settings Detail settings • Windows Vista/Windows 7 Clicking the “Property” button on the “Sound” window opens the window where you can select the sampling rate, etc. By making sound output settings on a computer appropriately, you may be able to monitor the sound better. Depending on a computer OS, the setting window differs. The following briefly introduces the setting window for each OS. See the computer manual or help screen for details.
Declaration of EC Directive This equipment is compatible with the EMC Directive (2004/108/EC) - Directive on approximation of member nation's ordinance concerning the electromagnetic compatibility and with the Low Voltage Directive (73/23/EEC) - Directive on approximation of member nation's ordinance concerning electric equipment designed to be used within the specified voltage range.