DVD Location Recorder

49
Location Recorder Model PD204
Chapter 3: Names and Functions
<Note>: The time code recorded is conformed to the setting done
by the quick setup mode or the "TC GEN" item in the "TC SETUP"
menu of the MENU mode. See pages 76 and 177 for details about
the "TC GEN" item.
• When recording with the PRE REC mode set to "ON":
Pulling this key starts recording from the audio data stored in the buffer.
The offset between the time code and ABS time values after a second
from the beginning of recording is also recorded.
You can select the buffered time between 1 and 10 seconds using the
"Pre rec time" menu item in the SYS SETUP menu of the MENU mode (the
default setting is 10 seconds) (see page 151).
22. Mixer section
The mixer section allows you to mix signals from inputs 1 through 4 and
send the mixed signals to the stereo bus.
a
c
b
d
f
g
hi
j
k
e
a. The [MASTER (L, R)] controls
Controls the master level of the signals sent to the stereo bus.
Each control adjusts the master level of the signal sent to the L or
R channel or the stereo bus.
The [MASTER (L, R)] controls can be linked by pressing the
[MASTER LINK] key. When linked, the L control adjusts the master
level of both L and R channels (see page 82).
b. [MASTER LINK] key
This key has the primary (unSHIFTed) and secondary (SHIFTed)
functions.
• When unSHIFTed:
Enables or disables the link function of the [MASTER (L, R)]
control. When the link function is enabled, the "LINK" indicator
under the [MASTER] controls is lit, while it is unlit when the
function is disabled (see page 83).
• When SHIFTed:
Switches on/off of the stereo bus limiter (see page 79).
When it is on, the [LIM.] indicator below the [MASTER (L, R)]
controls is lit. When the limiter is working, the indicator quickly
flashes.
You can set the limiter parameter using the "Limiter parameter"
item in the "SYS SETUP" menu of the MENU mode (see page 156).
c. [ST BUS SEND] control
Controls the channel send level to the stereo bus (see page 82).