DVD Location Recorder
57
Location Recorder Model PD204
Chapter 3: Names and Functions
Current drive/file number
This area shows the current drive name and the audio file number.
The following shows the examples when an audio file recorded on a DVD-RAM disk or
hard disk partition is loaded.
Protect icon
When a hard disk partition is protected, " " is shown.
You can protect or unprotect a hard disk partition via the "DISK UTILITY" menu of the
MENU mode (see page 205).
File name/Next file name
During playback or recording, this area shows the name of the current audio file.
In record pause (or stop) mode, it shows the name of the next audio file to be created.
Disk remaining
This area shows the remaining recordable space of a disk or partition in time.
The remaining time is shown during recording or while stopped. As the recording goes
on, the remaining time decreases (see "File name/Next file name" above).
When "Take" is selected
When "Date" is selected
When "Reel" is selected
The file name is given as the internal realtime clock data when you start
recording.
The file name is given as "<Scene name> + <Take number>". You can
specify the Scene name and the starting take number via the MENU mode.
The Take number is incremented automatically each time a file is created.
The file name is given as "<Disk (or partition) volume label> + <File num-
ber>".
A file name is automatically given and shown according to the setting of the "Default file
name" item in the "SYS SETUP" menu of the MENU mode, as follows.
(By default, the "Default file name" item is set to "Take". See page 138 for details about
the "Default file name" item.)
The DVD drive is selected as the current drive
and the audio file "002" is currently loaded.
Partition 1 is selected as the current drive and
the audio file "001" is currently loaded.
During recording, this area shows the name of the current
audio file, as well as the remaining time.
While in record pause (or stop) mode, this area shows the
name of the next audio file to be created, as well as the
remaining time.
During playback, this area shows the name of the current
audio file.