DVD Location Recorder

Location Recorder Model PD204

Chapter 5: Recording/Playback

You can select the prior power source when the unit can get power from both the battery and

[DC-IN] connection.

Power source priority selection [ ]

<Note>:

Only the available power source(s) can be selected. When only one power

source is available, it is automatically selected.

Available power source options (default: BATT1)

BATT1, BATT2, DC-IN

You can also select the prior power source via the "Active battery" and "Power priority" items

in the "BATTERY SETUP" menu of the MENU mode. (see page s 168 and 169)

Settings in the MENU mode

In the MENU mode, you can set many items besides those you can set via the quick setup mode.

Set the items in the MENU mode for recording/playback shown below if required.

The "Default file name" menu item selects the default name format of an audio file which is

created automatically when recording starts.

The "Default file name" is initially set to "SCENE NAME + Take number". So the name of the

first file recorded is "SCENE_001.wav." (You can set the desired scene name instead of the

default "SCENE").

You can select the default name format from "DATE" and "Reel Number + File Number" in

addition to the default "SCENE NAME + Take number".

You can select the default file name via the "Default file name" item in the "SYS SETUP" menu

of the MENU mode (see page

138).

Default file name setting

The maximum recording size per file can be selected. The default size is 2GB.

You can change it to 4GB according to the capacity of your personal computer which receives

an audio file created by the PD204.

You can select the maximum file size via the "Max file length" item in the "SYS SETUP" menu

of the MENU mode (see page

152).

Maximum file size setting

This setting is valid only when you make recording to a hard disk partition.

If partition link is enabled, when there is no recording space left in the current partition

during recording, the unit automatically creates a new file in the next partition and contin-

ues recording to it. By default, partition link is disabled.

You can select partition link setting via the "Auto part. link" item in the "SYS SETUP" menu of

the MENU mode (see page 153).

Partition link setting