DVD Location Recorder

Location Recorder Model PD204

Chapter 5: Recording/Playback

You can enable or disable the limiter function on each channel (1 through 4) by pressing the

[SHIFT] key followed by the [PAN] key. On the other hand, you can enable or disable the

limiter function on stereo bus by pressing the [SHIFT] key followed by the [LINK] key.

When the limiter function is active, the [LIM.] indicator of the corresponding input channel

(as well as the stereo channels) is lit. When the limiter is actually working, the [LIM.] indica-

tor flashes quickly.

[LIM.] indicator of the

Master channels

[LIM.] indicator of each

channel (1 through 4)

[LINK] key

[PAN] key

SHIFT

Using the [GAIN] control, you can adjust the input gain for each channel.

The nominal input level can be adjusted within the following range.

• When the LINE-MIC switch is set to "LINE": -32dBu to +4dBu

• When the LINE-MIC switch is set to "MIC": -34dBu to -70dBu

[GAIN] control

Adjusting the input gain (for channels 1 through 4)

[PEAK] indicator

Adjust the input gain of each channel appropriately so that the corresponding [PEAK] indi-

cator does not flash or light in red.