DVD Location Recorder

Location Recorder Model PD204

Chapter 5: Recording/Playback

Using the [ST BUS SEND] control on each of channels 1 through 4, you can adjust the signal

level sent to the stereo bus. Using the [MASTER (L, R)] control, you can adjust the stereo bus

master level.

Controlling signals sent to the stereo bus

[ST BUS SEND] controls

[MASTER] control

[PAN] keys

Using the [PAN] key on each of channels 1 through 4, you can select "L", "C" or "R" for the

panning position of the channel signal sent to the stereo bus. Each time you press the [PAN]

key, the option ("C", "R", "OFF" or "L") changes, and the corresponding indicator lights.

When "Off" is selected, no indicator is lit and the channel signal is not sent to the stereo bus.

By pressing the [MASTER LINK] key to

light up the [LINK] indicator, the [L]

control adjusts the master level of both

the left and right channels simulta-

neously.

[PFL/SEL] key

You can reverse the phase of the input signal by pressing the [SHIFT] key followed by the

[PFL/SEL] key of the desired channel. The [REV.] indicator under the bargraph meter of a

phase-reversed channel is lit. To disable the phase reverse, press the [SHIFT] key followed by

the [PFL/SEL] key again.

Phase setting (for channels 1 through 4)

SHIFT

[REV.] indicator

[LINK] key

[LINK] indicator

OFF

light in green light in yellow

unlit

unlit unlit

light in yellow

light in yellow light in green