DVD Location Recorder

83
Location Recorder Model PD204
Chapter 5: Recording/Playback
[MONITOR] control
[PHONES] jack
7
PQRS
GHI
4
space
1
LIGHT EXITFILE SELTIME QUICK SET
PHONES
MONITOR
MAXMIN
R/S
L/M
MONO
ST
MS
C1
C2
AUX
ON
OFF
POWER
DVDHDD
ACCESS
PD204 LOCATION RECORDER
SHIFT CONTRAST MENU DRV,PAT TC SET
ENTER
YES
BATT
Monitor select dial
Monitoring recording signals
<Note>: By default, the internal monitor speaker is automatically muted during record-
ing. You can select on or off of this mute function via the "Speaker mute" item in the
"SYS SETUP" menu of the MENU mode (see page 159).
You can monitor recording signals via headphones or the internal monitor speaker.
While a plug is inserted to the [PHONES] jack, the internal speaker automatically turns off,
and you can monitor the signals only via headphones.
The monitor level can be adjusted by the [MONITOR] control. This control can be pushed-
lock. By pushing down the control, you can put it down to the panel height level. By pressing
the control again, it comes out and you can rotate the control to adjust the level.
Depending on the settings of the monitor select dial, you can monitor the sound as shown on
the table below.
[PFL/SEL] keys
By pressing any of the [PFL/SEL] keys on channels 1 through 4, you can monitor Pre-fader
listen of the corresponding channel(s).
ST
MONO
L/M
For the future expansion. No monitor signal is assigned on this version.
R/S
M/S
C1
For the future expansion. No monitor signal is assigned on this version.
L: AUX L, R: AUX R
C2
AUX
Record
Playback
L: AUX L, R: AUX R
L: BUS MS L, R: BUS MS R L: ST MS L, R: ST MS R
BUS R (MONO)
BUS L (MONO)
ST R (MONO)
ST L (MONO)
ST L+R (MONO)
L: ST L, R: ST R
BUS L+R (MONO)
L: BUS L, R: BUS R