DVD Location Recorder

96
Location Recorder Model PD204
Chapter 5: Recording/Playback
Basic playback
Normal audio playback
The following procedure assumes that an audio file is recorded to a DVD-RAM disk or
hard disk partition.
1) Press the [SHIFT] key followed by the [FILE SEL /
DRV, PAT.] key to enter drive select
mode.
2) Use the [MENU] dial to select the desired drive and press the [ENTER/YES] key.
3) Select the desired audio file you want to play back using either of the following methods.
<Selecting a file using the
[[
[[
[
] / [] / [
] / [] / [
] / [
]]
]]
]
keys>
<Selecting a file from the FILE SEL screen>
While the unit is stopped, press the [FILE SEL/
DRV,PAT.] key to bring up the
FILE SEL screen, on which all audio files recorded to the selected drive are
listed.
Use the [MENU] dial to select the desired audio file and press the [ENTER/
YES] key.
The display shows the Home screen of the selected audio file.
LIGHT EXITFILE SELTIME QUICK SET
PHONES
MONITOR
MAXMIN
R/S
L/M
MONO
ST
MS
C1
C2
AUX
ON
OFF
POWER
DVDHDD
ACCESS
PD204 LOCATION RECORDER
SHIFT CONTRAST MENU DR V,PAT TC SET
ENTER
YES
BATT
FILE SEL
DRV,PAT.
LOCATE
CIRCLE TAKECUE
OFF
SLATEJAM
MIC
TONE
PRE REC
OFF
ON
symbol
0
9
WXYZ
MNO
6
DEF
3
CLEAR
FILE
FALSE START
CUE NEXTPREV
RECPAUSE
FILE
CUE
NEXTPREV
See "Skip/locate functions" on page 98 for details.
By pressing the [ ] or [ ] keys
while the unit is stopped, you can
skip backward or forward to the
beginning of the previous or next
audio file.