Network Adapter Owner's Manual

Location Recorder Model PD606

Chapter 6: Advanced operations

Making disk copy

The following procedure assumes that partition 1 (PT01) is selected as the current drive and

you attempt to copy audio data recorded on the partition to the DVD-RAM disk.

1) While the unit is stopped, press the [SHIFT] key to light [SHIFT] indicator, followed by the

[ENTER/YES] key.

The display now shows the MENU list screen.

2) Use the [MENU] dial to select “DISK UTILITY” and press the [ENTER/YES] key.

The display now shows the DISK UTILITY menu screen.

3) Use the [MENU] dial to select the “Disk copy” menu item and press the [ENTER/YES] key.

The display now shows the screen for selecting the drive of the copy destination.

The default setting “DVD” is flashing.

4) While “DVD” is flashing, press the [ENTER/YES] key.

The display now shows the screen for selecting the copy mode.

Rec area

Full area

Copies only the recorded area at high speed. (default).

Copies the whole UDF-formatted area.

Options

Flashing