Network Adapter Owner's Manual

149
Location Recorder Model PD606
Chapter 8: MENU mode/SYS SETUP menu
The “Peak hold” menu item sets the peak hold time of the peak level meters.
* When “∞” is selected, you can clear the peak hold indication by pressing the [CLEAR] key.
Peak hold time setting [Peak hold]
You can set the time between “0sec.” and “9sec.” in one second step or infinity (∞)
(the default is “3sec.”).
Options
1) While the unit is stopped, press the [SHIFT] key to light the SHIFT indicator, followed by the
[ENTER/YES] key.
2) While “SYS SETUP” is highlighted, press the [ENTER/YES] key.
The display now shows the SYS SETUP menu screen.
5) Press the [EXIT] key repeatedly until you exit the MENU mode.
4) Use the [MENU] dial to select the desired option and press the [ENTER/YES] key to confirm
your setting.
3) Use the [MENU] dial to select the “Peak hold” menu item and press the [ENTER/YES] key.
The current setting starts flashing and you can now select the desired option.
Flashing