p r o fe s s i o n a l s t u d i o m o n i t o r PM0.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER - SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. "WARNING" "TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE," SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2.
Introduction Thank you for purchasing the Fostex PM0.4 Professional Studio Monitor. As with all Fostex products, the PM0.4 has been designed to provide superlative performance, unquestioned reliability and exceptionally high value. The PM0.4 was specifically engineered to fulfillall of your critical near-field monitoring needs and is emblematic of the years of experience Fostex has had in the professional audio marketplace. The PM0.
Setup Instructions Monitoring Distance = 1 to 2 meters After carefully unpacking the PM0.4 Professional Studio Monitor, it is now time to setup the monitors for the best acoustic performance in your studio. The PM0.4 was designed to be used at amonitoring distance of 1 to 2 meters, typically referred to as the near-field. Monitoring Height = the acoustic center aimed at seated ear height It is recommended that the PM0.
Setup Instructions continued Once the studio monitors have been placed in their final location, it is time to proceed to connecting your PM0.4 studio monitors to the mixing console or digital workstation. Connection to the PM0.4 can be made using RCA or TRS connectors. The gain control on the back of the monitor allows continuously variable adjustments to match most input types of line level signals (-10dBV for RCA un-balanced).
Product Specifications Drivers Low Frequency Driver: 4" Cone Speaker High Frequency Driver: 5/8" Soft Dome Tweeter Amplifier Power Low Frequency : 18 W High Frequency : 18 W Cabinet Dimensions 144mm (W) x 220mm (H) x 180mm (D) includes heatsink 165mm (D) x cabinet only - no heatsink 5 3/4" (W) x 8 11/16" (H) x 7 1/8" (D) includes heatsink 6 1/2" (D) x cabinet only - no heatsink Amplifier Distortion <0.005% THD @ 12 Watts / 4Ohm 20Hz-20kHz Net Weight 3.
Declaration of EC Directive This equipment is compatible with the EMC Directive (89/336/EEC) - Directive on approximation of member nation's ordinance concerning the electromagnetic compatibility and with the Low Voltage Directive (73/23/EEC) - Directive on approximation of member nation's ordinance concerning electric equipment designed to be used within the specified voltage range.