p r o fe s s i o n a l m o n i t o r Subwoofer PM0.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER - SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. "WARNING" "TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE," SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2.
Introduction Thank you for purchasing the Fostex PM0.5-Sub MKⅡ Professional Monitor Subwoofer. As with all Fostex products, the PM0.5-Sub MKⅡ has been designed to provide superlative performance, unquestioned reliability and exceptionally high value. The PM0.5-Sub MKⅡ in combination with satellite speakers model PM0.5 MKⅡ, was specifically engineered to fulfill all your critical near-field monitoring needs and is derived from years of experience Fostex has gained in the professional audio marketplace.
Setup Instructions The Fostex PM0.5-Sub MKⅡ is designed to be operated with the Fostex PM0.5 MKⅡ satellite speakers. Please follow the Fostex PM0.5 MKⅡ Reference Manual to set up the satellite system. The PM0.5-Sub MKⅡ is designed to be placed directly on the floor. The line level output connectors provided on the back panel for connecting to the Fostex PM0.5 MKⅡ satellite speakers. Positioning of Subwoofer in the room drastically affects the overall frequency response and sound level of the system overall.
Back Panel Overview 1. XLR & TRS Combination Inputs These inputs is are electronically balanced inputs and are compatible with both -10dBV and +4dBusignals. 2. Woofer Gain This control adjusts the Subwoofer level. Use the control to blend the low frequency seamlessly with the satellite speakers. 3. Phase Switch This switch reverses the phase of the Subwoofer. Depending on the placement of the PM0.
Product Specifications Cabinet Dimensions 297mm (W) x 400mm (H) x 420mm (D) incudes heatsink 385mm (D) cabinet only - no heatsink 11 11/16" (W) x 15 3/4" (H) x 16 1/2" (D) includes heatsink 15 1/8" (D) cabinet only - no heatsink Amplifier Power 110Watts@1% Net Weight 16 Kg 35.3 Pounds Amplifier Signal to Noise Ratio > 80dB Amplifier Distortion <0.002% THD @ 50 Watts / 4Ohm Power Requirements US : 120VAC ~ 60Hz EUR/UK : 230VAC ~ 50/60Hz Cross Weight (includes all packing material) 18.5 Kg 40.
Declaration of EC Directive This equipment is compatible with the EMC Directive (89/336/EEC) - Directive on approximation of member nation's ordinance concerning the electromagnetic compatibility and with the Low Voltage Directive (73/23/EEC) - Directive on approximation of member nation's ordinance concerning electric equipment designed to be used within the specified voltage range.