Digital Multitracker Owner's Manual VF08
Table Of Contents
- SAFETY INSTRUCTIONS
- Contents
- Basic Features of VF08
- Names and Functions
- About the hard disk storage device
- Basic Recording and Playback
- Mixer Functions
- Recorder Functions
- Advanced Operation
- Save/Load of song data
- SETUP mode
- To enter the SETUP mode
- Time signature setting
- Setting a tempo
- Setting the Metronome function
- Setting MIDI sync output signal
- Setting an MTC frame rate
- Setting an MTC offset value
- Setting MTC Offset mode
- Setting the Slave mode
- Setting the Slave Type
- Setting the Record Protect function
- Setting Digital Input
- Setting BAR/BEAT Resolution mode
- Setting the MIDI device number
- Checking the number of track events
- The Drive Format Information
- Drive Setting
- Fader Fix Mode Setting
- Fader Recall Mode Setting
- Others
111
Specifications
Basic
Channel
Function....................
Default
Changed
Transmitted
Recognized
Remarks
Mode
Default
Message
Altered
Note
Number:
True Voice
Velocity Note ON
Note OFF
After
Touch
Key’s
Channel’s
Pitch Bend
Control
Change
Program
Change
True #
System Exclusive
Common
System
Real Time
: Clock
: Commands
Aux.
Message
: Local ON/OFF
: All Notes OFF
: Reset
: Active Sense
Notes
rem.1: MMC (Device ID=00~99, 127), MTC, Identity reply
rem.2: MMC (Device ID=00~99, 127), MTC, Inquiry
Mode 1: OMNI ON, POLY Mode 2: OMNI ON, MONO
Mode 3: OMNI OFF, POLY Mode 4: OMNI OFF, MONO
********************************
********************************
********************************
(rem. 1) (rem. 2)
X
X
X
(rem. 3)
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X: No
: Yes
Version: V1.00
Date:
Model VF08
MIDI Implementation Chart
(Digital Multitracker)
: Tune
: Song Select
: Song Position
: Quarter Frame
X
X
X
X
X
rem.3: START, STOP, CONTINUE
X