Digital Multitracker Owner's Manual VF08
Table Of Contents
- SAFETY INSTRUCTIONS
- Contents
- Basic Features of VF08
- Names and Functions
- About the hard disk storage device
- Basic Recording and Playback
- Mixer Functions
- Recorder Functions
- Advanced Operation
- Save/Load of song data
- SETUP mode
- To enter the SETUP mode
- Time signature setting
- Setting a tempo
- Setting the Metronome function
- Setting MIDI sync output signal
- Setting an MTC frame rate
- Setting an MTC offset value
- Setting MTC Offset mode
- Setting the Slave mode
- Setting the Slave Type
- Setting the Record Protect function
- Setting Digital Input
- Setting BAR/BEAT Resolution mode
- Setting the MIDI device number
- Checking the number of track events
- The Drive Format Information
- Drive Setting
- Fader Fix Mode Setting
- Fader Recall Mode Setting
- Others
51
Recorder Functions
The VF08 is "cueing" in the forward direction.
The VF08 is "cueing" in the backward direction.
2
1
3
1
2
The VF08 is "cueing" in the forward direction at 64x the normal speed.
3
Recorder Functions
This chapter describes various recorder functions.
Cueing
The cueing function allows you to monitor audio at higher or lower speed.
Cueing with the [F FWD]/[REWIND] keys
By pressing the [F FWD] or [REWIND] key during play-
back, you can monitor (cue) the sound at 3 times the
normal speed.
Press the [PLAY] key to start playback.
Press the [F FWD] or [REWIND] key during playback.
The VF08 starts "cueing" at 3 times the normal speed,
while "FWD" or "RWD" appears on the screen.
To return to the normal playback, press the [PLAY] key.
Shuttle cueing
During playback, "shuttle cueing" is possible at the
speed between 1 and 64 times the normal speed.
Press the [PLAY] key to start playback.
Rotate the [JOG/
SHUTTLE] dial while holding down the
[SHIFT] key.
• Rotating the [JOG/SHUTTLE] dial clockwise moves the
position to the forward direction, while rotating the dial
counter-clockwise moves the position to the backward
direction.
• According to the rotating degree, the cueing speed varies
among 1x, 2x, 4x, 8x, 16x, 32x, and 64x.
The current cueing speed is shown on the screen.
• As long as holding down the [SHIFT] key, shuttle cueing
continues even if you release the [JOG/SHUTTLE] dial.
The VF08 is "cueing" in the backward direction at 64x the normal speed.
The VF08 is still.
To return to the normal playback, press the [PLAY] key.
<Remember!>
Once the data is rewound to the beginning of a pro-
gram (ABS 0), playback starts from the beginning of
the program, regardless of pressing the [SHIFT] key.
When reaching the end of a program (ABS: 23H 59M
59S), the program stops and the [PLAY] hey flashes.