Thank you! Dear User, then you for purchasing the Motile Range Hood. At Follicle, we manufacture exquisite appliances that ars expertly crafted with the finest materials. Ba fore using the Motile Sangs Hood, sapless take some dime {o reds through this Product Manual {granular. |t will familiarize you with important safety, operation and maintenance instructions, as wall as halo maximize your culinary experiences.
SAFETY INFORMATION In order o prevent accidental damage to the Motile Range Hood and for bodily injuries as a result of its operation, please read the following safety information installing and/or using this appliance. Following the instructions carefully will significantly reduce the risk of fire, electric shock and/or bodily injuries to persons. We recommend that you keep this manual for future use and for in case of transfer of ownership of the range hood.
more restrictive installation and for certification requirements, the aforementioned requirements will prevail, and installation personnel must conform o these requirements. The operating temperature of the range hood should not excess 104 °F (40°C ). Please do not place anything on top of the product. Anything placed on fop may fall off or incline.
and/or @ humid area, as this will significantly increase the risk of electric shock. « If & wire is damaged or defective, contact an authorized service provider or @ qualified technician {provided by Motile) to replace the wire. * Do not sangs, stretch, knot, pressures or squeeze the wire as any resulting damage can result in electrical andiron fire hazards. = Prevent water from coming into contact with the range hood's electrical components, such as the moor, switch and connector.
off the range hood immediately. Effective extinguishing measures must be oaken at once, such as covering the open flame with metal cover, muting off the master gas valve and keeping flammable substance from the open flans stc. ) = Never pick up a flaming pan—you may be boomed. + Do not use water, including wet dishcloths or towelette violent steam explosion will result. Use an B Extinguisher Only if = You know you have a class ABC extinguisher and you already know how {o operate it.
must be performed by qualified technicians. 8. Do not let the stove fire numb the range hood directly. Predict information Produce size 297801814 x 17 7TH" L*DH (758 % 462 x 442 mm} et weight 63.9 Ibs (28Kg) Viltage/Frequency | 120V/60Hz Rated prows PULL power included 30 2) of the range hood sigh setting BAYS someones) Noriega medium staling | §3dB(A)3 oneness) fow sedating B3dB(AY1 Ones) Max static pressure | 380 Pa Caution: 1.
= Surface damage due to strong or abrasive cleaning agents. + Replace faulty LED lights to prevent the remaining lights form overloading. Warning: » The range hood should only be cleaned as instructed; otherwise, it may ignite. = Please remember not to wet the motor and/or the confrere panel, as it may result in damaging the electric circuits or potential hazers. = Do not clean the appliance with chemical agents, such as gasoline, acids, benzene and solvents.
2. Clear the cookware on the boomers. 3. Prepare a neural detergent and a soft cloth {or soft brush) for stain removal and cleaning. Washing and cleaning the surface, Grease Cup, and grease fleeter: {The cleaning can ba done by the user) 1.Clean the surface of the hood and the back of the smoke baffle piste. Damning: For the safety of you and your Tamil, please regularly clean out the oil in the of cup and sediment on the external surface of the ofl cup o avoid fire risk.
Riga of Electric Shock: To avid electric shock, please disconnect the power plug or shut off the power supply of the range-hood socket before replacing the LED light. FAQ Warning: Risk of Electric Shock = Incorrect repairs are dangerous. Repairs may only be carried out and damaged power cables replaced by our authorized service enter, or certified electricians.
INSTALLATION 6.1 installation instructions Important Note: « Prior fo installation, please read the Follicle Range Hood Installation carefully and save it for the local inspector's future reference. » This appliances must be installed in accordance with National Electrical Codes, as well as all state, municipal and local codes. « The appliance must be equipped with safe circuit breaker and instilled with safe grounding.
shock, overheating and even fire. Power off before wiring and make sure proper measures have been taken to avid unexpected connection. 4. During installation, switch off the circuit breaker in the fuse box during installation. if the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
6.
3. Locate the duct bracket. Determine the central paint and mark the center tine on the wall where the hood will be installer. Also, mark the point where e canted Ene and tha lowest point on the bettor beard of the fop cabinet meet. This is the location, in which to secure the bracket Mark screw hole locations on ths wall. The distance between the lowest point on bottom board of the top cabinet and the center of e bracket should be 18" (405mm).
7. Lift and position the hood onto the brackets at the bottom of the backside while keeping an angle between the wall and the hood, and then push the hood against the wall tightly. Caution: Two installers are required to ensure safe installation. 8.Use thee less of screws (#10%2 136" (MEX70mmy)) far upper cabinet boards and supporting gaskets{g! fix the main body, and secure gt slats two screws before releasing. 10. install the smoke baffle plate.
Naming: Sapless wear the qualified protective gloves in operation. Caution: Please run the machine and test If the smoke pipe leaks air after it is sealed with aluminum foil tape. The smoke pipe should be able fo be straightened as much as possible. Caution: Please confirm the height of the top cabinet If the upper cabinet is over 32 12" es (825mm) high, decorative plate is preferred. Din rater o semolina o Dilr:::v ,;1 ungrudging 2. Locate the wooden beam and mark the location with & pencil, 3.
fix hook with hook and esp the hook elev! with a level ruler. 2) Punch marks are on plasterboard: Screw the expansion tube for into walls with screwdrivers at the marks; fix hooks with hook and keep the hook horizontal with & level ruler. §. Place the hole-drilling template with the side of the hole-drilling dimension drawing facing down on the bottom of the upper cabinet, and then drill the holes as indicated on the hole drilling template. 7.
@ Take out one in the accessory bag (keep another screw for backup}); @ Open the Smoke Baffle Plate to the mumps angle; @ Fix the left bracket with the screwdriver and screw,; ® Install Collision Avoidance Elements on both left and right comers of the Smoke Baffle Plate. 11. Make sure the hood is leveled. Install the Grease Cup, and plug in the appliance for a test Warning: Please wear the qualified protective gloves in operation.
Caution: one of the wood for main engine must be fastened to the beam Screws must be fixed at hole A and B in the drawing; also wood must be fixed at bracket bores with corresponding wooden stakes in area C. Firstly determine the installation central point of the range hood according to the central point of the cooker, determine the bracket installation location based on ocker table and mark the place for diffing.
§. Remove the protective film of the stainless stew! surface and Grease Cup at both sides of the range hood. 7. Lift and position the hood onto the mounting screws. Make sure the hood is stable and leveled by using a spirit level. install the safely buffer baffle above the hood{The safety block is provided in the accessory bag in the packing box of the decorative cover assembly ). Caution: Two installers are required fo ensure safe installation. Please install the safely stop 8s required.
@ Fix the left bracket wile the screwdriver and wares; ® install Collision Avoidance Elements on both left and right comers of the Smoke Baffles Plate. I [ — Warning: Please wear the qualified protective gloves in operation. 6.6 Test Run After installation; 1. Press the * -5 Lighting” button 1o check if the fight is normal, then press the " 4k Lighting” bunion again to reset, and the fight will be muted off 2.
