User's Manual

10
11.4. Display Settings
¾ Power on or off display: Set the power-On or power-Off animations.
¾ Wallpaper settings: Set an image as wallpaper.
¾ Idle display settings: On, it will be displayed in the standby interface.
¾ Contrast: Adjust the displaying contrast.
¾ Backlight: Set the backlight time.
¾ Keypad backlight time: Set the duration for keypad backlight.
¾ Auto keypad lock: Set to lock the keypad.
11.5. Security
The phone lock password, SIM card password and PIN2 support 4-8digit numbers, do not support other characters. The default password of the phone when
leaving the factory is 1234.The PUK /PUK2 are required to input if you want to unlock the SIM card. The PUK/PUK2 is provided by the network operator.
y PIN: open or close the PIN lock function. When PIN lock is launched, the PIN shall be input upon each power-on.
y Modify PIN2: Input the correct PIN 2. Just can be change.( The SIM2 security setup is same to the SIM1 security setup.)
y Phone locked: Open or close the phone lock function. When the phone lock is launched, the phone lock password shall be input upon each power-on.
y Change phone password: You can change the phone password.
y Privacy: If you select these modules for Data security, you must input the correct password when you want to view these modules.
y Lock screen by end-key: Activate, in the idle mode, you can use the power-key to lock the screen.
y Screen lock password: Set on, you will be asked input the password when you unlock the keypad.
y Mobile tracker: You can track your phone when the phone lost.
y Fixed dialing: Add the numbers for fixed dialing.
y Blacklist: You can check the black list number in here and set the feature whether need to act on calling or messaging. If you added the current contact
to blacklist you will be not received the call or messages from this number.
11.6. Connections
¾ Network account: choice the network settings for data account before you want to use internet.
¾ GPRS Service: enable/disable the GPRS network.
¾ Data connection settings: You can control the internet access as “always connect” or “Connect when needed”..
¾ Network selection: choice the modes of searching the phone network, including Auto and Manual modes.
Note: Synchronization data will list in Bt Music, Phone Bt, Bt Inbox (Message) and call logs BT list.