User guide

ManualsBrandsFotodiox ManualsLightingReflector Arm

5in1 Reflector

Instruction Manual

www.fotodiox.com

For Information Regarding this

and more of our products,

please contact us:

E-mail: info@fotodiox.com

Phone: 847.201.4623

www.fotodiox.com

3805 Hawthorne Ct.

Waukegan IL, 60087

We’re also on:

Video Coming Soon!

/fotodioxinc

Summary of content (4 pages)

PAGE 1
Video Coming Soon! /fotodioxinc 5in1 Reflector Instruction Manual Contact Us: For Information Regarding this and more of our products, please contact us: E-mail: info@fotodiox.com Phone: 847.201.4623 www.fotodiox.com 3805 Hawthorne Ct. Waukegan IL, 60087 We’re also on: www.fotodiox.
PAGE 2
5in1 Reflector Assembling the Reflector The Stand Specs and Features Product Overview Fotodiox Premium Grade 5in1 Reflector provides the ultimate in photo solutions. Use as a fill reflector with a soft cold silver, neutral white or warm tone gold. Can be used as a plain diffuser or use the black to block unwanted light. The Fotodiox Premium Grade 5in1 reflector disc is made of premium grade, quality reflective and diffusive materials guaranteed to flatten out when opened.
PAGE 3
Assembling the Reflector Assembling the Reflector The Rotating Heads The Rotating Heads 3/4” Instructions for the 6ft stand 2 3 3 To mount the rotating heads to the 6ft stand, locate the 3/4” hole on one of the heads Loosen the head by giving the handle a few of turns; Slide and clamp the 1” hole to the first extension pole Without loosing sight of the 3/4” hole, detach half of the head by unscrewing the handle and clamping it to the second extension pole NOTE: Careful not to loose the spring or wa
PAGE 4
Assembling the Reflector The Reflector 1 Extend the arm to the width of the reflector disk by loosening the handles Assembling the Reflector The Rotating Heads 1 To adjust the angle of the reflector holding arm, loosen the rotating heads enough to unlock the teeth Teeth Locked 2 Using the clips from the holding arm, clip the disc’s metal frame onto the arm 2 5 Teeth Unlocked Adjust the angle by rotating the heads and locking them in position 6