Use and Care Manual

PRODUCT DESCRIPTION
BENEFITS/FEATURES
SUGGESTED APPLICATIONS
TECHNICAL INFORMATION
COVERAGE
SHELF LIFE
PACKAGING
The Armor AR350 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will
darken the surface and enhance any dull and faded coloring, and protect the surface with a durable low gloss surface film. The
Armor AR350 is a fantastic sealer if you are looking to bring out dull and faded surfaces, and enhance surfaces with a low gloss
wet look finish. Color packs are available and can be mixed in to provide an opaque-colored low gloss finish. Non-slip additives
are also available.
Solids………………………………………………25%
Drying Time……………………………………….1-2 hours
Re-Coat Time…………...…………………………24 hours
Foot Traffic..............................................................24 hours
Wheel Traffic...........................................................24 - 48 hours
Application Temp....................................................45°F - 85°F
When properly sealed and stored, the shelf life of the Armor AR350 is up to 1 year.
The Armor AR350 is available in a 16 OZ Sample, 1 Gallon Bottle, 5 Gallon Pail, and 55 Gallon Drum.
Porous Surfaces: Up to 175 FT2/gallon in one coat.
Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat.
Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The
above coverage rates are estimates and will vary. Two coats are suggested for even coverage and appearance.
Wet Appearance.......................................Clear
Dry Appearance........................................Low Gloss
VOC Content............................................Low VOC
Blush Resistance.......................................Good
Solvent Resistance....................................Minimal
Concrete Adhesion....................................Excellent
Armor AR350 Wet Look/Satin Gloss Acrylic Sealer
Foundation Armor
3 Howe Drive, Suite 2
Amherst, NH 03031
[phone]
FoundationArmor.com
For Professional Use
 Breathable, UV resistant
 Reduces deterioration caused by surface abrasion
 Reduces the formation of mold, mildew, and algae
 Reduces surface stains
 Easy to apply, maintain, and recoat
 Made from US Manufactured non-recycled resins
 Will darken the surface to make it look wet
 Can be applied to unsealed surfaces, and surfaces previously
sealed with a solvent based acrylic sealer
 Poured, broom finished, and stamped concrete.
 Concrete pavers.
 Exposed aggregate concrete.
 Driveways, walkways, and stairs.
 Pool decks and patios.
 Garage, warehouse, and basement floors.
 Car ports, pole barns, retail and restaurant floors.
CONTACT
Still have questions? Contact a Foundation Armor Technician at 866-306-0246.