Use and Care Manual

PRODUCT DESCRIPTION
BENEFITS/FEATURES
SUGGESTED APPLICATIONS
TECHNICAL INFORMATION
COVERAGE
SHELF LIFE
PACKAGING
The Armor AR350 is a solvent-based wet look/satin gloss acrylic sealer that is designed to seal, enhance, and protect a variety of
interior and exterior surfaces. It is manufactured in the U.S., and made from high quality resins and solvents. The Armor AR350
will enhance dull or faded surfaces, and provide a long-lasting, water repellent, non-yellowing satin/low gloss finish that won’t
peel. It is available in clear, as well as several color options. Non-slip additives available.
Solids………………………………………………25%
Drying Time……………………………………….1-2 hours
Re-Coat Time…………...…………………………4 - 24 hours
Foot Traffic..............................................................24 hours
Wheel Traffic...........................................................24 - 48 hours
Application Temp....................................................45°F - 85°F
When properly sealed and stored, the shelf life of the Armor AR350 is up to 1 year.
The Armor AR350 is available in a 16 OZ Sample, 1 Gallon Bottle, 5 Gallon Pail, and 55 Gallon Drum.
Old or Porous Surfaces 175-225 ft
2
/gallon in one coat
Dense or Trowel Finished Surfaces 250-325 ft
2
/gallon in one coat
The average coverage rate is 250 FT2/gallon in one coat. Coverage rates will vary depending upon surface porosity and texture, and applica-
tion method. Excessive build up should be avoided.
Wet Appearance.......................................Clear
Dry Appearance........................................Low Gloss
VOC Content............................................Low VOC
Blush Resistance.......................................Good
Solvent Resistance....................................Minimal
Concrete Adhesion....................................Excellent
Armor AR350 Wet Look/Satin Gloss Acrylic Sealer
Foundation Armor
472 Amherst Street #14
Nashua, NH 03063
[phone]
FoundationArmor.com
 Provides a long-lasting, non-yellowing satin/low gloss finish.
 Reduces deterioration caused by surface abrasion.
 Reduces the formation of mold, mildew, and algae.
 Reduces the formation of efflorescence.
 Reduces concrete dusting and surface stains.
 Resists oil.
 USDA Compliant.
 Easy to apply and maintain.
 Can provide up to 2-5 years of life before the need for a recoat.
 Breathable.
 Poured, broom finished, and stamped concrete.
 Concrete bricks and pavers.
 Exposed aggregate and some natural stone.
 Do not use on red clay brick without first applying to a test area.
 Driveways, walkways, and stairs.
 Pool decks and patios.
 Garage, warehouse, and basement floors.
 Car ports, pole barns, retail and restaurant floors.