Installation Guide

PRODUCT DESCRIPTION
BENEFITS/FEATURES
RECOMMENDED APPLICATIONS
TECHNICAL INFORMATION
SPECIFICATIONS/COMPLIANCES
APPROXIMATE COVERAGE RATES
SHELF LIFE
PACKAGING
ARMOR AR500
LOW VOC, 100% PURE ACRYLIC, NON-YELLOWING HIGH GLOSS LACQUER
ARMOR AR500
ACRYLIC SEALERS
Armor AR500 is a high gloss, 400 VOC, fast drying, non-yellowing/UV-resistant, pure acrylic concrete lacquer style sealer
designed for decorative concrete. Armor AR500 offers improved resistance to rain, the sun, freezing temperatures, stains,
and other pollutants that sometimes can be hazardous to concrete. Applying Armor AR500 to exposed aggregate will also
help to eliminate loose pebbles and premature wear. Armor AR500 offers improved resistance to rain, sun, freezing tem-
peratures, stains, and other pollutants that sometimes can be hazardous to concrete.
♦ Can be used as a means of dustproofing most concrete surfaces.
♦ Due to our 100% pure acrylic formula, this product will not yellow under ultravilolet exposure.
♦ Fast drying time highly reduces the risk of trapped solvent or other types of moisture issues.
♦ Offers a durable high gloss finish. May bring coloring back in dull or faded pavers.
Armor AR500 is recommended for use on Stamped Concrete, Stenciled Concrete, Acid Stained Concrete, Overlaid Concrete,
Exposed Aggregate Concrete, Broom Finish Concrete, and Trowel Finish Concrete. Other uses may be acceptable.
Solids………………………………………………………..25%
Drying Time…………………………………...30 min. - 1 hour
Re-Coat Time…………...………………………...4 - 24 hours
Foot Traffic...........................................................4 - 6 hours
Wheel Traffic....................................................24 - 48 hours
Application Temp...............................................40°F - 85°F
***Please note that low air and/or concrete temperatures and/or relative humidity may extend drying times. Follow recommended coverage rates for best results.
Application Surface First Coat Optional Second Coat
Armor AR500 has a shelf life of up to two years in it’s original, sealed, unopened container.
Armor AR500 is packaged in 1 gallon cans, 5 gallon pails, and 55 gallon drums.
New (unsealed) concrete 250-350 ft
2
350-400 ft
2
Old (sealed) concrete 350-400 ft
2
350-400 ft
2
*Coverage rates vary depending upon surface porosity and texture, and application method. Excessive build up should be avoided.
Wet Appearance.......................................Clear to lightly cloudy
Dry Appearance........................................Clear and High Gloss
VOC Content.................................................................<400g/L
Blush Resistance...............................................................Good
Solvent Resistance.........................................................Minimal
Concrete Adhesion.......................................................Excellent
PRODUCT CODE: AR500
DRIED COATING IS USDA ACCEPTED
This product complies with federal AIM Rule VOC regulations and with VOC standards in Ohio, Illinois, Maryland, New York, New Jersey, Delaware, Pennsylvania, Maine, New Hampshire,
Virginia, and the District of Columbia. Lower VOC formulations are available upon request to meet requirements in states not listed.
FOUNDATION ARMOR
3 Bud Way STE 27 Nashua NH 03063
Phone: [phone]
Visit us online at: www.FoundationArmor.com
UPC 1 GAL: 856994005022 / UPC 5 GAL: 856994005039