How to Guide

PRODUCT DESCRIPTION
BENEFITS/FEATURES
SUGGESTED APPLICATIONS
TECHNICAL INFORMATION
COVERAGE
SHELF LIFE
PACKAGING
The Armor SX5000 WB is a Department of Transportation approved water based Silane-Siloxane water repellent sealer that penetrates deep
into the concrete surface where it chemically reacts to form a hydrophobic barrier within the pores. Surfaces sealed with the Armor SX5000
WB are more resistant to the damaging effects of water absorption, such as cracking, spalling, pitting, freeze thaw and salt damage, staining,
mold and mildew, and efflorescence. It can be applied to interior and exterior, vertical and horizontal unsealed surfaces.
Solids………………………………………………+/- 20%
Drying Time……………………………………….1-2 hours
Re-Coat Time…………...…………………………Wet on Wet
Foot Traffic..............................................................12-24 hours
Wheel Traffic...........................................................24 - 48 hours
Application Temp....................................................45°F - 85°F
When properly sealed and stored, the shelf life of the Armor SX5000 WB is up to 1 year.
The Armor SX5000 WB is available in a 16 OZ Sample, 1 Gallon Bottle, 5 Gallon Pail, and 55 Gallon Drum.
Porous Surfaces: Up to 175 FT2/gallon in one coat.
Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat.
Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The
above coverage rates are estimates and will vary. Two coats are suggested for even coverage and appearance.
Wet Appearance.......................................Clear
Dry Appearance........................................Invisible
VOC Content............................................Low VOC
Blush Resistance.......................................Excellent
Alkalinity Resistance................................Excellent
Concrete Adhesion....................................Excellent
Armor SX5000 WB Approved Silane Siloxane
Water Repellent Sealer
Foundation Armor
3 Howe Drive, Suite 2
Amherst, NH 03031
(866) 306-0246
FoundationArmor.com
For Professional Use
Contains up to 5X more active ingredients than similar products
Will maintain the natural, unsealed look and feel of the substrate
Will provide up to 7-10 years of life before the need for a recoat
Breathable, low odor.
Will reduce deterioration caused by water absorption such as
cracking, spalling, pitting, staining
Will reduce the formation of mold and mildew
Will reduce freeze-thaw and salt damage
Will reduce the movement of moisture through the concrete pores
Is approved by the Department of Transportation as a water repel-
lent sealer in several states
Poured, broom finished, and troweled concrete.
Pavers and brick.
Aggregate and natural stone.
Driveways, walkways, and stairs.
Pool decks and patios.
Garage, warehouse, and basement floors and walls.
Car ports, pole barns, retail and restaurant floors.
COMPLIANCES
NCHRP 244 Report, Series II:
Reduction in Water Absorption: +/- 81-95%
Reduction in chloride ion content: +/- 84%
Reduction in water vapor transmission: +/- 100%
Dried coating is USDA accepted

Summary of content (2 pages)