- Foundry Router User Guide

Foundry AR-Series Router User Guide
11 - 6 © 2004 Foundry Networks, Inc. June 2004
configure router rip interface authentication
This command configures RIP-2 authentication for an interface.
The type of authentication and the key value to be used can be specified, but this is only valid with RIP version 2
(mode 3). When authentication is configured, all subsequent RIP updates contain authentication information. In
addition, all subsequent incoming RIP packets on that interface are accepted only if they carry a valid
authentication header.
Parameter Description
syntax:
[ no ] authentication auth_type line
example:
Foundry-AR1208/configure/router/rip/interface ethernet1# authentication md5 mymd5keyvalue
This example configures RIP interface Ethernet 1 for MD5 authentication.
related commands:
applicable systems:
All models.
auth_type The RIP-2 authentication algorithm.
simple Use simple password authentication.
md5 Use MD5 authentication.
md5_cisco Use Cisco MD5 compatibility.
line The RIP-2 authentication password/key
Enter an alphanumeric string of up to a maximum of 16 characters.
configure router rip interface distribute_list
configure router rip interface metric
configure router rip interface mode
configure router rip interface neighbor
configure router rip interface passive
configure router rip interface split_horizon