Caution : You must read this before you proceed CHAIR CAUTION : This Chair is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Chair and to prevent damage to the Chair, 02 persons may be needed to execute this action.
Label Picture Description QTY Right Leg Panel A With Pr-installed 1 Levelers Left Leg Panel B With Pr-installed 1 Levelers Cc Seat Panel 1 D Backrest Panel 1 E | Backrest Cushion Seat Cushion 1 20f8
Allen Key Hardware Label Picture Description QTY @® Screw (M7*70mm) 7 ® Bolt (M6*35mm) 3 1 casein bly Preparation Before Beginning Assembly: Road instructions, cover to cover Have 2 adults on hand for assembly: Da not assemble on flooring or carpet: Assemblywoman non-marring surface {packing foaminess all packaging until finished: offs
Overview Backrest i Seat Cushion 5 : . Right Leg Panel With Pr-installed Levelers (A) Left Leg Panel With Pr-installed Levelers (B) Seat Panel (C) x FRONT FACING This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarize yourself with the parts and steps before assembly.
: Attach mortise of Left Leg Panel With Pr-installed Levelers (B) to tenon of the Seat Panel (C) Secure by using Screw (D) with Allen Key(®) Do not fully tighten the Screws. Step 3 With assistance from your adult partners, turn the Chair to the other side as shown in pix Attach mortise of Right Leg Panel With Pr-installed Levelers (A) to tenon of the Seat Panel (C) Secure by using Screw (D) with Allen Do not fully tighten the Screws.
With assistance from your adult partners, turn the Chair right side up 4.1) Attach Backrest Panel (D) to Right Leg Panel With Pr-installed Levelers (A) by using Screws with Allen Key 4.2) Attach Backrest Panel (D) to Left Leg Panel With Pr-installed Levelers (B) by using Bolts with Allen Key Do not fully tighten the Bolts and Screws. Step 5 Sm Adjust height for Adjust low for balance balance A Adjust Pr-installed Leveler height for Inspect the Chair and make sure all parts are adequately connected.
Place Seat Cushion(F) and Backrest Cushion (E) on to the Chair using the Velcro straps as shown above. Your Chair is ready for use. This Chair can only be used on a flat, level surface.