Installation & Assembly

ManualsBrandsFoundry Select Manuals3-4 Person Patio Conversation SetsNowthen Solid Wood 4 - Person Seating Group with Cushions

Assembly Instructions

Caution: You must read this before you proceed

Chair

Caution: This Chair is NOT a TOY.

Keep your child/children at bay during the assembly process.

Whenever moving/lifting the Loveseat and to prevent damage to the Chair,

two adults are required to execute these actions.

1 of 7

Summary of content (7 pages)

PAGE 1
Assembly Instructions Caution: You must read this before you proceed Chair Caution: This Chair is NOT a TOY. Keep your child/children at bay during the assembly process. Whenever moving/lifting the Loveseat and to prevent damage to the Chair, two adults are required to execute these actions.
PAGE 2
Part List Label Picture Description Qty C Seat Panel 1 D Backrest Panel 1 E Right Panel 1 F Left Panel 1 G Support Bar 1 H Seat Cushion 1 I Back Cushion 1 Description Qty ④ Screw (M7x70mm) 5 ⑤ Screw (M7x120mm) 3 ⑥ Allen Key 2 Hardware No.
PAGE 3
Assembly Preparation Before Beginning Assembly: Assembly Steps Overview Back Cushion (I) Backrest Panel (D) Right Panel (E) Seat Cushion(H) Seat Panel (C) Left Panel (F) Support Bar (G) FRONT FACING This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
PAGE 4
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 D ⑥ F G ④ ⑥ ⑤ With the help of your adult partners, attached the tenons of Backrest Panel (D) and Support Bar (G) into the mortises of Left Panel (F) using Screws (④) and (⑤) with Allen Key (⑥) as shown in picture above. Repeat the same process with the Right Leg (E) Do not fully tighten the Screws.
PAGE 5
Step 3 C Insert Seat Panel (C) into assembled in step 2 as pictured above. Step 4 H Place Seat Cushion (H) onto the Chair, and turn the Chair right side up to affix the velcro straps around the Chair as shown above.
PAGE 6
Step 5 I Place Back Cushion (I) onto the Chair. Then EXERT pressure, floorwards onto the Chair with both hands. This pressure will help the Chair reach full alignment at all joints. In a sequential manner, gradually tighten alScews at all joints until evenly secured. Inspect the Chair and make sure all parts are adequately connected. Your Chair is ready for use. This Chair can only be used on a flat, level surface.
PAGE 7
of 7