Certifications

MODULE D: CONFORMITY TO TYPE BASED ON QUALITY ASSURANCE OF
THE PRODUCTION PROCESS
The equipment of the manufacturer identified below which was found to be in compliance with the requirements of the
Regulation of Appliance burning gaseous fuels (EU) 2016/426 Annex III,3 and with the type described in the Module B: EU
Type-Examination – Production type listed in the Attachment to this Certificate, subject to any conditions in the
description attached hereto.
maintains and supplies a quality system in accordance with the requirements of the Regulation of Appliance burning
gaseous fuels Annex III,3 Module D.
The attached (list of approvals) forms part of this certificate.
This certificate remains valid unless suspended or withdrawn.
The attached (list of approvals) forms part of this certificate.
This certificate remains valid unless cancelled, expired or revoked
Notes:
This certificate authorises the manufacturer or his authorised representative established within the Community in
conjunction with the Module B: EU TYPE-EXAMINATION-PRODUCTION TYPE CERTIFICATE of the equipment listed in
the scope to affix the "Mark of Conformity" (CE mark).
This certificate loses its validity if the manufacturer makes any changes or modifications to the approved quality
system, which have not been notified to, and agreed with the notified body named on this certificate and/or after
lapse of time, withdrawal or revocation of the Module B: EU TYPE-EXAMINATION-PRODUCTION TYPE CERTIFICATE.