Installation & Assembly

ASSEMBLY INSTRUCTIONS &
PARTS IDENTIFICATION
BACKLESS STOOL
Description
Hardware kit
Qty
Hex nut M8
Lock washer M8
Flat washer M8 x 18
Key Wrench 12
Screw Ø4 x 40
Qty
Description
Parts key
Complete Seat
Right Facing Leg
Left Facing Leg
Front Stretcher w/ Metal Trim
Back Stretcher
Small Side stretcher
Floor Glide
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come
loose inside the carton during shipment.
D
E
6 235
4
C
A
B
DETAIL A
DETAIL B
x 08
x 08
E
1
7
2
5
6 6
4
3
2
3
2
3
2
1 pc
2 pcs
2 pcs
1 pc
1 pc
2 pcs
4 pcs
08 pcs
08 pcs
08 pcs
01 pc
08 pcs
STEP 2
STEP 1
- Carefully lay the Complete Seat (1) on a smooth flat surface to prevent scratches.
- Attach the legs of stool (2) and (3) to the appropriate positions.
Using the Hex nuts (A), Lock washer (B) Flat washer (C).
- Do not fully tighten the nuts at this point. (See Detail A)
- Attach the Front stretcher (4), Back stretcher (5) and Two Side stretchers (6)
according to the illustration. Note the position of the seat top to determine
the front and back. Use Screws (E) to attach the stretchers to the legs by
using a Screwdriver (not provide). (See Detail B)
- Finally, tighten all the Hex nuts using the wrench provided before turning
the chair over for use.
A
B
C
D
E
No
1
2
3
4
5
6
7
No