Assembly Instruction

1
1.0
Assembly Instructions (English)
ASSEMBLY INSTRUCTION FOR
1. Be careful when unpacking the lamp since
the wires are connected.
If the wires are pulled out of their connectors,
the lamp will not turn on.
2. Screw the tube (B) onto lamp body (A)
until tight.
3. Insert the G9 LED bulb (C) onto each
socket.
4. Place the opal shade (D) onto the socket,
then turn it clockwise to tighten.
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
---------------------------------------------------------------
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug as a feature
to reduce the risk of electric shock (one blade is
larger than the other). This plug will fit in a
polarized outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician.Do not use
with an extension cord unless the plug can be fully
inserted. DO NOT ALTER THE PLUG .
-------------------------------------------------------
BULB TYPE: 6pcs * G9 3W LED bulb (bulb
included).
PARTS DIAGRAM
(2) * tube (B)
(6) * G9 3W LED bulb (C)
(6) * Opal glass shade (D)
LED Table Lamp

Summary of content (2 pages)