Assembly Instruction

This page lists all the contents included in the box.

Please take the time to identify the hardware as

well as the individual components to this product.

As you unpack and prepare for assembly, place

the contents on a carpeted or padded area to

protect them from damage.

ASSEMBLY INSTRUCTION

Allen Wrench

1/4”

1PC

Bolt

1/4”x1-1/4”xØ15

Bolt

1/4”x1/2”xØ15

Side Frame - LSF Side Frame - RSF

A B C D

F G H

Top Panel

1PC 14PCS 2PCS

1PC

1PC 1PC 1PC

Bottom Cross BarCross Bar

Drawer

END TABLE

PAGE 1
ASSEMBLY INSTRUCTION END TABLE A Top Panel B 1PC E Cross Bar I 1PC Allen Wrench 1/4” C Drawer 1PC F Side Frame - LSF D 1PC Bottom Cross Bar 1PC G Bolt 1/4”x1/2”xØ15 14PCS Side Frame - RSF 1PC H Bolt 1/4”x1-1/4”xØ15 2PCS 1PC This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
PAGE 2
***Do not tighten screws & bolts until the entire unit is completely assembled. 1 Attach Side Frame - LSF (C), Side Frame - RSF (D) to the Cross Bar (E) by using Bolt (G) and Allen Wrench (I) as shown. C D E G I 2 Attach Bottom Cross Bar (F) to the Side Frame - LSF (C) and Side Frame RSF (D) by using Bolt (G) and Allen Wrench (I) as shown.
PAGE 3
Attach Drawer (B) to the metal base by using Bolt (G), Bolt (H) and Allen Wrench (I) as shown. D B H E I H C F G G 4 Attach Top Panel (A) to the Side Frame - LSF (C) and Side Frame - RSF (D) by using Bolt (G) and Allen Wrench (I) as shown. G I D A B C Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time.