Owner Manual #2

OPERATION AND FEATURES
Remote Control
Using the Control Panel
Adjust Brightness
This function will
cycle through the
four different levels
of flame brightness. Hold
5 seconds to switch
readout between °F and
°C.
Power
This will turn the unit ON/
OFF.Hold the power
button on the control
panel for 5 seconds to
disable or re-enable the
Child-Lock function.
Adjust Heater
This function will cycle
through the different
temperature levels
62-82℉ (17-27℃）of
the heater. Hold 5
seconds, Temperature
figure blinking and can
adjust. Default
temperature is 62℉
(17℃).
Timer
This will allow you to set
the automatic switch off
on the fireplace. Setting
can be 0.5h to 9h.
PS: The button light will
off when no opreation in
3 seconds, and will light
up when press the button
again.
DLVSOD\
Display could be awake
by pressing any button.