ASSEMBLY INSTRUCTION DINING TABLE Ta bis Top B dice Apish Table Center B gravimeter Support 1pc 2 pes 1pc 2 pes JOB Bolt JOB Bolt U Washer Flat Washer MBx 55mm MB.x 45mm pes 7 pes 10 pes 5 pes ll Spring Washer Allen Key: M6 M4 x 60mm & . & pes 1 e This page. lists all the contents inclined in the bax. Please take the time to identify the hardware as well as'the individual components 1o this product.
1 Install hie side of Side Apron (B) with one side of Table Leg (D) by using Hem U Washer (G} and CBC Bolt M6:x 85mm (E). Then install Table Center Support {C) by using item U Washer (G} and CBC Alt M6 x 48mim (F). Use hardware. Allen Key M4 x minim {J) to frighten the hardware but please do net over tighten the bolts in this.
3 Install last part of Table Leg (D) by using hardware JCT Bolt M6 x 85mm (E) and U Washer (3). Tighten in'this step by using hardware Allen Key M4 x 60mm (J).
4 Lastly, install Table Top (A} by using hardware CBC Bolt M&x 45mmi{F), Flat Washer M& (H), and Spring Washier M6 (1] at the four sides of Table Leg Then, use the same types of hardware o install Table Top (A)at Table Center Support{C). Tighten-all hardware in this step by using hardware Allen Key 84 <. 60mm (J). Stand the table up on even surface and check that'it Is balanced. if there's: a slight wobble, apply downward pressure in the-comer where 4 leg is uneven.
