Dining Chair
PART LIST A B D C E Back Seat Front Leg Side Rail Strecher 2 PCS 2 PCS 2 PCS 4 PCS 4 PCS HARDWARE LIST #1 #2 #3 M4 x 32mm M4 Spring Washer Screw Allen Wrench 16 PCS (Extra 2) 16 PCS (Extra 2) 1 PC M6 x 50mm 1/4" Bolt 16 PCS (Extra 2) #4 ADDITIONAL TOOLS (Not Provided) Note: It is not recommended to use power tools during assembly.
Step 1 . Attach side rails (part D) to back (part A) using bolts (part #1), spring washers (part #2) and allen wrench (part #4). See Figure 1. Attach strechers (part E) to back (part A) using screws (part #3) and phillips head screwdriver. See Figure 2. NOTE: Please do not fully tighten bolts until unit is fully assembled. D #4 E D #1 #2 #1 #2 #1 #2 #1 #2 #3 A Figure 1 E #1 #2 #1 #2 #3 Figure 2 #3 #1 #2 #3 #4 x4 x4 x2 x1 Step 2 .
Step 3 . Attach seat (part B) to assembled unit (parts A, C, D & E) using screws (part #3) and phillips head screwdriver. C E E D #3 #3 #3 #3 D #3 B A #3 Step 4. Carefully turn unit upright. Repeat steps 1-3 to assemble remaining chair.
