Instructions for Assembly

Instructions for Fountain Assembly
 Place the fountain on a level surface, away from areas where it is
likely to get clogged with leaves and make sure that the cable will
reach the socket.
 Follow steps below to assemble. Illustrations follow the steps.
Step (1). Set the middle part to the base.
Step (2). Feed the rubber hose through the plastic tube of middle part. Set the
top to the middle part.
Step (3). Connect plastic hose to pump outlet.
Step (4). Fill the fountain with enough clean water to assure the pump to work
properly.
Thank you for choosing us. If you have any questions, comments or
concerns please feel free to contact us by phone or you could also email us via
We stand behind our brand and the quality of the items we sell. We will send
new parts, or replace products at our discretion within the one year warranty
period. Before we can help, you will need to provide proof of purchase with the
date of purchase and photos of the defective merchandise. We will use the
photos to determine the cause of defect and for future quality control.
our contact us page.
Step (5). Plug the pump then water will start to flow soon.