Use and Care Manual

CARE AND MAINTENANCE OF PAINTED ALUMINUM
Cleaning Tips:
In addition to their enduring good looks, Four Seasons Building Products are easy
to maintain. Airborne pollutants, however, such as emissions from autos and
local manufacturing plants, can cause an acidic build-up on any baked enamel
product surface. This can easily be removed by periodic cleaning with any
household detergent. Simply mix a few teaspoons of dishwashing liquid in a bottle
or hose sprayer and apply liberally to all exposed surfaces, then rinse freely.
CAUTION: DO NOT USE ABRASIVE OR SOLVENT-TYPE MATERIALS OR PAINT
REMOVER. THOSE MATERIALS MAY SOFTEN OR REMOVE YOUR BAKED ENAMEL
FINISH.
To Remove Mildew: Black spots on the surface of your aluminum product may be
caused by mildew. Watch carefully for it, especially on protected surfaces, such as
beneath eaves or in patio enclosures. To eliminate mildew, prepare and apply the
following solutions:
1/3 cup detergent (i.e. Tide®)
2/3 cup tri-sodium phosphate (i.e. Soilax®)
3 quarts of water
1 quart 5% sodium hypochlorite (i.e. Clorox®)
Mix ingredients together and apply with sponge or cloth to mildewed areas. Wear
protective gloves and avoid contact with skin.
CAUTION: GREATER CONCENTRATIONS MAY CAUSE DAMAGE TO ALUMINUM
FINISH. AVOID SKIN CONTACT. FOLLOW INSTRUCTIONS FOR CLEANING AND
RINSING GIVEN ABOVE UNDER “CLEANING TIPS”.