Installation Manual

www.fullriverbattery.com Page 5
2.3 - BATTERY ORIENTATION
Theidealplacementofbatteriesisupright.AGMbatteriescanbeplacedontheir
sideifnecessary.Itispreferredthatallthebatterieswithinapackbeplacedinthe
same orientation.
NEVERplacebatteriesinaninvertedorientation.
2.4 - SERIES CONNECTIONS
There is more than one option to meet your voltage requirements. For example, for
a12voltsystem,youmayuseone(1)12voltbatteryortwo(2)6voltbatterieswired
inaseriestomakeupthe12volts.Youmayuseasmanybatteriesasyouneedto
make up the system voltage. Connect the positive of one battery to the negative
of the next through the entire string. See DIAGRAM 2belowfortheproperseries
connection.
Installation
Series Connection:
Voltage is increased in a series connection
Two 6V, 224AH batteries = 12V, 224AH
DIAGRAM 2