Technical Specifications

6110 Abbott Drive
Omaha, NE 68110
1-877-369-2562
www.foxblocks.com
Please call toll free, 877-369-2562, or visit WWW.FOXBLOCKS.COM for more information.
© 2013 Fox Blocks
Page 1
00480 Fox Buck Tech Doc Rev-F.pdf
FOX BuCK
COntinuOuS inSuLatiOn
Contractors, design professionals and building owners have been asking to address the
ICF buck issues for years. The Fox Blocks team now has the answer. An “ICF FULLY
INTEGRATED CONTINUOUS INSULATION” window and door buck for residential and
commercial applications.
2” thick for easy
measurements
Full 1 ½” wide full
height fastening
zone for door and
window attachment
Notches ensure proper Fox
Buck and Fox Block alignment
48” height to
match block lineup
Dual full length 1” x 1” grooves
to create solid concrete barriers against
drafts and moisture penetration
Designed slots in the buck face allow
for trapped air to escape
Full width fastening
zones @ 8” o/c across
the buck face surface
Circles marked @ 16” o/c
for sill cutouts to ensure
proper consolidation
FOX BuCK nuMBERS
Available Sizes 6” 8”
Total Width 11.25” 13.25”
Total Length 48” 48”
Bundle Quantity 10 10
Bundle Weight 25 lbs 30 lbs
The Fox Buck was
designed to be compatible
with the Fox Energy Stick,
maintaining the continuous
concrete barriers.
The 1” x 1” notches create a dual barrier against drafts
or moisture penetration. When installed properly, the
concrete barrier protection is continuous around the
entire opening. These barriers also anchor the Fox
Buck to the wall with enough strength to hold in most
weather* conditions
Photo above reveals consolidated concrete barriers
created within the Fox Buck
* Contact Fox Blocks for high wind anchoring recommendations.