Installation Instructions

877-369-2562 | WWW.FOXBLOCKS.COM | 6110 Abbott Drive | Omaha, NE 68110
Fox Blocks ICF Guidebook V5MAR17
30
ICF BRACING/SCAFFOLD
When building walls over three courses tall
Fox Blocks recommends the use of
ICF Bracing/Scaffolding.
ICF BRACING/SCAFFOLD HAVE
THREE MAIN PARTS:
1) STIFF BACK WHICH IS ATTACHED
TO THE STUDS IN THE WALL
Screw to ties in block which are 8" o/c.
One screw per block row.
2) TURNBUCKLE WHICH ADJUSTS
THE WALL.
Threaded rod within the turnbuckles
tilt wall in or out as you turn it.
3) PLANK SUPPORT ARM FOR
SCAFFOLD.
Will accept two 2 x 10's and toe kick.
* Guard rail posts are also provided for those taller jobs
WHY WE USE ICF
BRACING/SCAFFOLD
Safe work site and straight walls
The use of a string line will
give you straight walls.
No one has an eye good
enough to straighten
walls longer than 20'.
With the proper kits, this
type of scaffold can be
used for walls up to 24' tall.
Contact Fox Blocks for walls
over 24' tall. It has become
common to see walls 30' to
over 60' tall.
The above photo shows
two racks of 20 braces
for a total of 40 sets.
At six foot on center
this would be enough
for 240 lineal feet of wall.
Simply stake or screw
the turnbuckle feet to
the ground or floor
10' or 12' Giraffe Scaffold
AVAILABLE THROUGH FOX BLOCKS
Racks of 20 sets
FACTS
10' Brace Set = 75 Lbs
12' Brace Set = 88 Lbs
20 x 10' and rack = 1650 Lbs
20 x 12' and rack = 1900 Lbs
Budget one brace every 6' of wall
End user provides planks railing
& screws
How-To Section