SDS

Product: Fox Blocks
SDS Page 2 of 7
Section 4: First Aid Measures
Description of First Aid Measures
Inhalation Remove to fresh air. If not breathing, provide CPR (cardio pulmonary
resuscitation). Get immediate medical attention.
Skin Contact Wash skin with plenty of soap and water. If hot material gets on skin, immediately
flush affected area with large amounts of cool water. Do
not attempt to remove the material from the skin, or to remove contaminated
clothing. Get immediate medical attention.
Eye Contact Immediately flush eyes with plenty of water for at least 15 minutes. Remove
contact lenses if present and safe to do so. If hot material comes in contact with
eyes hold the eyelids apart and flush the eye with a large amount of cool water for
at least 15 minutes. Get immediate medical attention.
Ingestion If swallowed do NOT induce vomiting, rinse mouth with water. Never give
anything to an unconscious person. Get immediate medical attention.
Most important symptoms and effects, both acute and delayed
Symptoms/Injuries after Inhalation Dust and/or vapors may cause respiratory tract irritation. In confined or poorly
ventilated areas, vapors can readily accumulate and can cause unconsciousness and
death.
Symptoms/Injuries after Skin Contact May cause skin irritation. Symptoms may include redness, drying, defatting, and
cracking of the skin.
Symptoms/Injuries after Eye Contact May cause eye irritation. Symptoms may include discomfort or pain, excess
blinking and tear production, with possible redness and swelling.
Symptoms/Injuries after Ingestion May be harmful if swallowed. May cause stomach distress, nausea, or vomiting
Indication of any immediate medical attention and special treatment needed
INHALATION: This material (or a component) sensitizes the myocardium to the effects of
sympathomimetic amines. Epinephrine and other sympathomimetic drugs may initiate cardiac
arrhythmias in individuals exposed to this material. Administration of sympathomimetic drugs
should be avoided.
EYES: Hot material may cause burns to the eyes. Early ophthalmologic evaluation is
recommended.
SKIN: Hot material may cause skin burns. Immerse skin covered with hot material in cool water to
limit tissue damage and prevent spread of liquid material.
Symptoms may not appear immediately. In case of accident or if you feel unwell, seek medical advice immediately.
Section 5: Fire-fighting Measures
Suitable extinguishing media Use foam, dry chemical, or carbon dioxide. Do not use solid water
stream as it may scatter and spread fire.
Special hazards arising from the substance or mixture Combustion may produce hazardous decomposition products and other
decomposition products in the case of incomplete combustion. These
may include simple hydrocarbons to toxic and irritating gases such as
carbon, carbon monoxide, carbon dioxide, styrene, acids, ketones, and
aldehydes. Material is a solid containing an extremely flammable liquid
and vapor. Material will burn on contact with flame or exposure to high
temperature. Hazardous melting and dripping may occur at elevated
temperatures. Explosion hazard if exposed to extreme heat. This material
releases a flammable blowing agent. Extremely flammable vapors form
flammable or explosive mixtures with air at room temperature. Vapor or
gas may spread to distant ignition sources and flash back. Eliminate
ignition sources (including static spark) and prevent vapor accumulation.
This material, as produced and not in its finely divided form as dust, is
not explosive as defined by established regulatory criteria. When in its
finely divided form as dust, this material presents an explosion hazard
when dispersed in a confined area and ignited in air. Risk of dust-air
explosion is increased if flammable vapors are present. This material