Installation Guide

ManualsBrandsFOX-ESS ManualsUsb StickFOX-ESS GPRS USB Stick

GPRS Stick Installation

APP Installation

Create A Plant

Step 1:

Use a screwdriver to

open the Smart GPRS.

Note:

1. Please check from the side of the slot to make sure

the SIM card core has sufficient contact with the card

slot.

2. Please make sure the cover has been slide properly,

otherwise the signal might be reduced.

Step 1:

Please click ‘Sign

Up’, enter

installer’s

information to

complete the

installer account

registration.

Note: If you

already have an

installer/agent

account, please

press ‘Sign In’

and login with

your installer/

agent account

directly.

Step 2:

Select ‘End User’ then scan

the GPRS bar code on the

Smart GPRS, and click ‘OK’.

We suggest you complete all

information to ensure

after-sales service.

For End User

Step 2:

Select ‘Installer’ and enter Installer name, then click ‘OK’.

We suggest you complete all information to ensure

after-sales service.

Note:

Installer: The installer

Agent: The agent/distributor/installation company.

Step 1:

Please click ‘Sign Up’, enter end user’s information

to complete the end user account registration.

For Installer

Step 2:

- Slide cover to the left to unlock and

open;

- Insert the card into the slot (Make

sure the core is facing down);

- Close the cover;

- Slide cover to the right side to close.

Step 3:

Insert the Smart GPRS board

into the shell.

Step 4:

Insert the Smart GPRS into the inverter WiFi/GPRS

interface and tighten the dongle.

Note: lable face to front.

Note: The device must be away from strong magnetic

fields generated by large electrical equipment, such as

microwaves stoves, refrigerators, wireless phones,

photovoltaic panels and metal walls to ensure

communication quality. Communication quality might be

affected by lightning.

Scan the QR Code below to download and install the

FoxCloud APP on your smartphone.

Please choose from below operator:

- Tata

- Aircel

- Airtel

- Vodafone (Please contact Vodafone service to activate

the SIM card before use.)

For Installer

Step 1:

Open the APP,

Installer/agent account.

Summary of content (2 pages)

PAGE 1
GPRS Stick Installation Step 1: Use a screwdriver to open the Smart GPRS. Note: The device must be away from strong magnetic fields generated by large electrical equipment, such as microwaves stoves, refrigerators, wireless phones, photovoltaic panels and metal walls to ensure communication quality. Communication quality might be affected by lightning.
PAGE 2
Step 2: Press the ‘+’ icon on the homepage to add plant. Press the scan icon next to the ‘Datalogger List’ to scan the QR code label on front side of the Smart GPRS. Step 2: Press the ‘+’ icon on the homepage to add plant. Press the scan icon next to the ‘Datalogger List’ to scan the QR code label on front side of the Smart GPRS. Step 3: After scanning code successfully, click ‘OK’ on the top right corner of the page, APP will pop-up a message ‘Add Datalogger’, please click ‘OK’.