Product Manual

Usb1 and USB2 are shown in the left figure
■ hidden wireless charging switch, which can control the opening or closing of wireless charging
function, is designed for scenes that are not suitable for continuous wireless charging (such as too
high in ultra-high temperature environment
When the phone is in direct sunlight, the screen may be black and off due to continuous charging
of the phone
Machine protection, in this case, the wireless charging function can be temporarily turned off)
■ the wireless charging indicator light can make the charging state clear at a glance, and the
blue indicator light is wireless
When the charging is stopped, the red indicator light is in the charging state. The wireless
charging function and indicator light can be completely turned off by long pressing the switch
(enter through the switch on the back of the device
Row control)
■ the bayonet locking device (off-road mode) can ensure the safety of the mobile phone. When
the locking function is turned on, the mobile phone will not fall off the support accidentally (this
function is applicable to non paved roads)
It is used with most mobile phones, and will not be affected by touching the button on the edge
of the mobile phone by mistake. The design of this product is compatible with 4.2-6.5 inches (it
can carry a 7-inch mobile phone at most)
■ all parts in contact with the mobile phone are made of soft rubber, which has a certain
high-frequency vibration filtering effect to protect the mobile phone from damage to the greatest
extent
■ the central opening on the top is designed to make the operation easier and faster when
taking and placing the mobile phone ■ with the mobile phone case, the wireless charging
function is still available (except for the metal or metal containing mobile phone case)
■ electrical parameters
● input voltage: DC 12~36v
● working voltage: DC 7.2V (charging working voltage) ● maximum working current: 4A
● wireless output power: 15W
● wireless sensing distance: 6mm (can penetrate the mobile phone case less than 3.5mm) ●
usb1 (upper / Black) output voltage: DC 5V 2A
● USB2 (down / orange) output voltage: DC 5V2A
● overheat protection temperature: +65 ℃