Product Manual

Productdiagram
Instructions
Place / remove the phone
■ it is recommended to place the mobile phone as follows:
① Place the mobile phone horizontally and hold the upper edge of the mobile phone
with one hand; ② Place the lower edge of the mobile phone on the movable snap part
first;
③ Press the mobile phone down to move the moving parts down. When the mobile phone
moves down and the upper edge is lower than the upper edge of the charging device,
push the mobile phone backward to make the upper edge of the mobile phone snap into
the card slot on the top of the charging device.
Note: the upper edge of the mobile phone bracket and the edge rubber of the latch
position are designed to adapt to the vast majority of mobile phones, which will
not affect the use of the mobile phone due to clamping the mobile phone and
accidentally touching the keys on the edge of the mobile phone. If the above situation
occurs when you use this product, please check whether the mobile phone is fully
placed, and turn the direction of the mobile phone to observe the positioning;
■ about lights
Blue light: indicates that the wireless charging is on, but it is not in the wireless
charging state
● red light: indicates that wireless charging is in progress
● light off: indicates that the wireless charging function has been turned off
● light Alternation: indicates that the wireless charging protocol is in docking
Note: for some models, the light of the wireless charger remains on for 60 seconds
after the ignition is off, which is the function of the vehicle ACC power supply
control delay function. When the ACC power supply is stopped, the power supply of
the wireless charger is cut off, and the light goes out.
■ wireless charging / switch control
● before using wireless charging, please confirm that your vehicle is in the power
supply state (the key door is opened) and the blue light on the top of the wireless
charging device is on
● after placing the mobile phone with wireless charging function on the wireless
charging device, the blue light will automatically switch to the red light,
indicating that the wireless charging is in progress, and the mobile phone
synchronously displays that the charging is in progress
● note: the intermittent and alternating flashing of blue light and red light in
some models of mobile phones indicates that the mobile phone and wireless charging
equipment are in the process of charging protocol docking. After several times, the
red light continues to light, and the charging can be maintained normally
● when the mobile phone is fully charged (100% of the mobile phone), the wireless
charging will stop automatically,
At this time, the indicator light is switched from red light to blue light