Product Manual

● if you need to turn off / on the wireless charging function in the wireless
charging state, you can press the switch button on the back of the device once. At
this time, the light is switched to blue, indicating that the wireless charging has
been turned off and the mobile phone charging has stopped synchronously; To turn
on the wireless charging function again, press again
And the back switch button. At this time, the light is switched to red, and the mobile
phone charging synchronization starts
● if you need to turn off the wireless charging and lighting completely, press and
hold the switch button on the back of the device for 2 seconds. At this time, the
wireless charging function is turned off and the lighting is turned off
● note: no matter whether the wireless charging device is on or off and the light
is on or off, when the vehicle power is cut off and the power is restored, the wireless
charging device will return to the initial standby state (wireless charging on, blue
light on)
■ USB output interface
● the device provides two USB output interfaces, which are not affected by wireless
charging
When used; The USB interface is not controlled by the back switch. Even when the
wireless charging is completely off, the USB interface can still provide power
supply.
● the upper USB interface (black) is a standard 5V, 2A DC output, which can
Provide stable power output for any 5V power supply equipment, such as charging for
power bank, Bluetooth headset, driving recorder, etc.
● the USB interface (Orange) below is an efficient qc3.0 protocol output interface,
which provides 5V output voltage. In addition to supplying / charging any 5V device,
it also has the characteristics of high-speed charging, which can be used to quickly
restore the power of ultra-low battery mobile phones
Note: usb1/usb2 port / wireless charging function can be used at the same time. In
order to ensure the performance of wireless charging when all outputs are used at
the same time, the output current of the other two USB ports will be limited, and
the charging performance of the USB port will be reduced, but this will not affect
the normal use of electrical equipment.
■ safety locking device
This product only has a safety locking device. This device is to ensure that the
mobile phone's movable lock is firmly fastened, so as to ensure that the mobile phone
will not fall off accidentally under the influence of external forces. The handle
at the bottom of the support is placed on the left for locking
● place the handle at the bottom of the support at the right position to unlock
Note: in order to ensure reliable locking, the force when pulling the locking handle
when carrying the mobile phone is large (the effect is small when the mobile phone
is not placed), which meets the design requirements. This stress acts on the moving
parts and will not touch the mobile phone.
(the non locked state can be used for driving with mobile phones, which is usually
used for vehicles with paved roads or vehicles with low engine vibration, but it