User Guide

ManualsBrandsFoxAlien ManualsMilling machinesCNC Router Machine 300W Spindle 3-Axis Engraving Milling Machine for Wood Metal Acrylic MDF Nylon Carving Cutting Arts and Crafts DIY Design

Double click to start

Grblcontrol (Candle)

Connect USB

cable to

computer and

machine, click

Service->Port

select COM

port. Click “OK”

Make Your First Cut

-26-

Select PC mode, press

the power switch

If Status becomes Alarm

and [MSG: Check Limits]

appears in the console at

the same time, please

check whether the limit

switch is triggered. You

can power off and release

the limit switch manually

or refer to page 28 of the

manual to release the

limit via software.

Console window

prints “CTRL+X”

indicates that

the connection

is failed. Need to

check whether

the E-stop is

pressed down. If

yes, turn the E-

stop clockwise,

and then click

“Unlock”.

Console window prints “[CTRL+X] < Grbl 1.1f

[‘$’ for help]” if the connection is successful.

Click “Unlock”.