User`s manual

Chapter 3 BIOS Description
47
Power Management Events Menu
vWake-Up by PCI card (Default: Enabled)
This option is used to set the system to wake up by PCI card. The setting
values are: Disabled and Enabled.
vPower On by Ring (Default: Enabled)
If this item is enabled, it allows the system to resume from a software
power down or power saving mode whenever there is an incoming call to
an installed fax. This function needs to be supported by the relevant
hardware and software. The setting values are: Disabled and Enabled.
vWake up by Onboard LAN (Default: Enabled)
This option is used to set the system to wake up by onbard LAN. The setting
values are: Disabled and Enabled.
vUSB Wake-Up From S3 (Default: Disabled)
This option is used to set the system to wake up by USB equipment when it is
in S3 (Suspend to RAM) mode. The setting values are: Disabled and Enabled.
vResume by Alarm (Default: Disabled)
This option is used to set the timing of the start-up function. In order to use this
function, the start-up password function must be cancelled. Also, the PC power
source must not be turned off. The setting values are: Disabled and Enabled.
vDate (of Month) Alarm
When the Resume by Alarm set as “Enabled”, this option will be modified. It is
used to set the timing for the start-up date. The setting valuescontain 0 - 31.
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn