Owner's Manual

5. A message prompts.

Press [Ctrl-Y] to erase the RAID array.

6. Another screen prompts.

Press any key to use the maximum capacity.

7. The selection of LD1 array is completed.

The nal capacity of 164.56GB (82.28GB*2) is twice capacities of the smallest size

of the four hard drives.

[ Dene LD Menu ]

LD No RAID Mode Total Drv Capacity(GB) Status

LD 1 RAID 0

2 163.99 Functional

LD 2 −−−− −−−− −−−−−−−− −−−−

LD 3 −−−− −−−− −−−−−−−− −−−−

LD 4 −−−− −−−− −−−−−−−− −−−−

LD 5 −−−− −−−− −−−−−−−− −−−−

LD 6 −−−− −−−− −−−−−−−− −−−−

LD 7 −−−− −−−− −−−−−−−− −−−−

LD 8 −−−− −−−− −−−−−−−− −−−−

LD 9 −−−− −−−− −−−−−−−− −−−−

LD10 −−−− −−−− −−−−−−−− −−−−

[↑] Up [↓] Down [ESC] Exit [Enter] Select

[ Keys Available ]

LD 1 Unknown 4 164.56 Functional

[ Dene LD Menu ]

LD No RAID Mode Total Drv

LD 1 RAID 10 4

Stripe Block: 64 KB Fast Init: ON

Gigabyte Boundary: OFF Cache Mode: WriteThru

Channel :ID Drive Model Compatibilities Capacity(GB) Assignment

1 :Mas HDS728090PLA380 SATA 3G 82.34 Y

2 :Mas WDC WD1200JD-98HBB0 SATA 1.5G 120.03 Y

3 :Mas Hitachi HDT725025VLA3 SATA 3G 250.05 Y

4 :Mas ST3320620AS SATA 1.5G 320.07 Y

Fast Initial

[ Dene LD Menu ]

[ Drives Assignment ]

Press Ctrl-Y to Modify Array Capacity or press any

other key to use maximum capacity...

Fast Initialization Option has been selected

It will erase the MBR data of the disks,