User`s manual
105
Appendix
105
7. Click "Graphics Settings>CrossFire™”, then select the "Enable CrossFire™”
check box. When a conrmation message pops up, click "Yes". The screen
backs out for about one minute.
8.
Click “OK”. The onboard graphics card is set to be the main monitor.
1. Follow steps 1 to 3 on Using the onboard graphics card.
2. From the ATI Catalyst(TM) Control Center
screen, click "Display Manager>Graphics
Adapter". Select "ATI Radeon HD 3450
[HPL1706]". Click "OK", and then "Yes"
from the conrmation window.
3. Follow steps 6 on Using the onboard
graphics card to complete the process of
setting up the onboard graphics card as
your main monitor.
If you are using both an add-on and the onboard graphics cards at the
same time and want to set the onboard card as your main monitor, follow
the instructions below.
C
A
U
T
I
O
N
!