User`s manual

Create RAID 0 (Striped)

Here, we will show you how to create two RAID 0 Logical Drives (LD) by using two

hard disks.

1. Select [2] from the main menu, " LD View Menu" appears.

2. Press [Crtl-C], the screen appears as below, select RAID 0.

3. Use [↓] key to select the hard disks, press [Space] key to change its assignment

status to "Y". Press [Ctrl-Y] to save the setting. And a message prompts. You can

select any of the two options. Here we select the latter option as an example.

< There is no any LD exist >

[↑] Up [↓] Down [PaUp/PaDn] Switch Page [Ctrl+C] Dene LD

[Enter] View LD [Ctrl+V] View Single Disk [ESC] Exit

[ Dene LD Menu ]

[ Keys Available ]

[ LD View Menu ]

LD No LD Name RAID Mode Drv

LD 1 Logical Drive 1 RAID 0 2

Stripe Block: 64 KB Fast Init: ON

Gigabyte Boundary: ON Cache Mode: WriteThru

Port :ID Drive Model Compatibilities Capacity(GB) Assignment

1 :Mas HDS728090PLA380 SATA 3G 82.34 Y

2 :Mas WDC WD1200JD-98HBB0 SATA 1.5G 120.03 Y

3 :Mas Hitachi HDT725025VLA3 SATA 3G 250.05 N

4 :Mas ST3320620AS SATA 1.5G 320.07 N

[↑] Up [↓] Down [PaUp/PaDn] Switch Page [Space] Change Option

[Ctrl+Y] Save [ESC] Exit

[ Dene LD Menu ]

[ Drives Assignment ]

Please press Ctrl-Y key to input the LD name

or press any key to exit.

If you do not input any LD name,the default

LD name will be used.

[ Keys Available ]