User`s manual

3
17
Security
Administrator Password Status
This item is used to install or change administrator password.
After you input administrator password, it then will ask you to conrm the password.when the
password has been set up , the following interface will be displayed.
► User Password Status
This item is used to install or change user password.
► Security option
To protect the BIOS from being changed by the unauthorized users, there is a security option
provided for your choice. Only when there exists an Administrator password, then this setting
can be activated.
[setup]:A password will be required to enter the BIOS.(Only check password when enter setup)
[Always]:A password will be required to enter both the system and BIOS. (Always check
password)
► ME Flash Write Protect
This item is used to enable or disable ME Flash Write Protect.
Version 2.15.1231. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Power Security BootOptions Save & Exit
Administrator Password Status Not Installed
User Password Status Not Installed
Change Supervisor Password
ME Flash Write Protect [Enabled]
: Move
Enter: Select
+/-: Change Opt
ESC: Exit
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit Setup
F7: Load User-dened Defaulta
F8: Save as User-dened
Valid Keys:
(1)a-z (A-Z)
(2)0~9
(3)11 special keys:-=[];,./
(2)key pad:0-9 support and 5 special
keys
Security