Assembly Instructions
60
Hardware Installation
3.20. Mainboards
3.20.1. Removing a Mainboard
CAUTION:
:KHQUHPRYLQJDQ\FRPSRQHQWZHDUDSURSHUO\JURXQGHGVWDWLFVWUDSWRSUHYHQWVWDWLFGLVFKDUJH
Follow these steps to remove a mainboard:
1. Remove the top cover from the server. See “Removing a Top Cover” on page 10.
2. Remove the expander assembly. See “Removing a K2V4 Expander Bracket” on page 44.
3. Remove the heat sink. See “Removing a Heat Sink” on page 56.
4. Remove the memory module. See “Removing a Memory Module” on page58.
5. Disconnect all cables from the mainboard.
Remove the screws securing the mainboard.
7. Lift the front of the mainboard and pull it away from the rear of the system. Make sure the I/O
ports clear the chassis before lifting the mainboard.
Remove the mainboard.
)LJXUH 5HPRYLQJWKH0DLQERDUG